Custom formulated thermoplastic powder coatings
for the finishing industry.

Technical Data Sheet
Ph: 814-456-1243 • Fax: 814-459-2853
www.thermoclad.com

Duralon EF-1 (9.6%) Nylon Primer Flammable Solvent Base

Product Properties
Solids Level 9.6% +/- 2% by weight
Recommended Use Level 6 - 9.6%
Adhesion of Nylon Coating to a chemically cleaned, heat resistant substrate Bond is greater than film strength
Heat Stability, Preheat 30 min. @ 550ºF (288ºC)
Panel Vapor Test 24 hrs., 200ºF at 100% R.H. 22 gauge, Zinc Phosphated panel with 30º Bend and Scored Coating: Duralong J (Nylon 11)  
Adhesion Excellent
Polymer Flexibility Hard but not brittle
Reducer for Dilution Methyl Ethyl Ketone

Reduced to the proper application solids level, Duralon EF-1 Nylon Primer may be applied in a manner compatible with your present equipment, be it dip, spray or flow-coat.

Please contact us for additional application recommendations, information or samples.

The above properties are based upon tests and data believed to be reliable, since actual use by others is beyond our control, no guarantee, expressed or implied is made by The Thermoclad Company as to the effects of such use or results to be obtained.